Board index Equipment Printers Epson R270

Printers

Epson R270

riklar
 
Posts: 2

Epson R270

Post Sun Feb 17, 2008 2:24 pm


Hello,

In a former Epson R200 I used to connect two iMac.
One was connected via the regular way, and the second one was connected via the camera in USB connection .
Ir worked very well for the last three years.
I have now Epson R270.
Unfortunately the iMac which is connected to the Camera in USB connection with a USB Mail/Mail connection is unable to connect the computer to the printer.

Is there a way to overcome this problem.

TIA for any help

castledude
 
Posts: 869


Post Sun Feb 17, 2008 4:25 pm


Probably not... the R200 was unique in that the front USB port was a general purpose port that supported picbridge. The newer Epsons only support picbridge USB on the front port.

You will need to get an external usb switch (not a hub) to allow two devices to control one printer.

riklar
 
Posts: 2


Post Sun Feb 17, 2008 7:07 pm


Thanks for your explanations.
I am sorry, but can you explain what is Picbridge.

The problem I am facing is with the front USB port.

castledude
 
Posts: 869


Post Mon Feb 18, 2008 1:26 am


Pictbridge is a special type of format that allows the camera to directly communicate with the printer. So you can connect a Canon/Nikon/etc directly to the printer (no computer involved). The camera then controls the printing using it's menus.

It's supported by most camera and printers now.

http://en.wikipedia.org/wiki/PictBridge


Board index Equipment Printers Epson R270

Who is online

Users browsing this forum: No registered users and 2 guests